Category:DS-207+
From NAS-Central Synology Wiki
| This article is currently a stub. You can help this Wiki by expanding it . This template will categorize articles that include it into Category:Stubs. |
| DS-207+ | |
| CPU | Marvell 88F5281 (500MHz) |
| RAM | 128 MB |
| Flash ROM | 4MB NOR |
| Other | ? |
| PHY | MARVELL 88E1118-NNC1 Gigabit Ethernet Transceiver ("Alaska" series) |
| USB | ? |
| internal HDD | 2 x SATA |
| SATA Controller | MARVELL 88SX7042 (4xSATA PCIe) |
| Fan |
Reviews
SmallNetBuilder: Synology DS207
german review with many pictures
u-boot log
__ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE
U-Boot 1.1.1 (Aug 10 2007 - 19:12:18) Marvell version: 1.11.2
DRAM CS[0] base 0x00000000 size 128MB
DRAM Total size 128MB
[4096kB@ffc00000] Flash: 4 MB
Addresses 20M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (20M - 16M): Done
Using default environment
Soc: 88F5281 D0
CPU: ARM926 (Rev 0) running @ 500Mhz
Orion 2 streaming disabled
VFP initialized to Run Fast Mode.
SysClock = 166Mhz , TClock = 166Mhz
Model: DS-207+
CPLD version: 0x0
FAN Status: Running
USB 0: host mode
CPU: Write allocate enabled
Net: egiga0 [PRIME]
Press Ctrl+C to abort autoboot in 1 second
Synology> printenv
bootcmd=bootm FFC00000 FFE00000
baudrate=115200
loads_echo=0
ipaddr=192.168.107.207
serverip=192.168.1.52
stdin=serial
stdout=serial
stderr=serial
cpuName=926
CASset=min
enaMonExt=no
enaFlashBuf=yes
enaCpuStream=no
enaVFP=yes
enaWrAllo=yes
enaICPref=yes
enaDCPref=yes
MALLOC_len=4
ethprime=egiga0
bootargs_root=root=/dev/nfs rw
bootargs_end=:::DB88FXX81:egiga0:none
image_name=uImage
standalone=fsload 0x400000 $(image_name);setenv bootargs $(bootargs) root=/dev/mtdblock0 rw ip=$(ipaddr):$(serverip)$(bootargs_end); bootm 0x400000;
bootdelay=3
disaMvPnp=no
ethaddr=00:00:00:00:51:81
overEthAddr=no
usb0Mode=host
bootargs=console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS207+v10 ihd_num=2
ethact=egiga0
Environment size: 738/8188 bytes
Kernel boot
## Booting image at ffc00000 ... Image Name: Linux-2.6.15 Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1395004 Bytes = 1.3 MB Load Address: 00008000 Entry Point: 00008000 Verifying Checksum ... OK OK ## Loading Ramdisk Image at ffe00000 ... Image Name: synology_88f5281_207+ 0590 Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 686753 Bytes = 670.7 kB Load Address: 00800000 Entry Point: 00800000 Verifying Checksum ... OK Starting kernel ... Uncompressing Linux......................................................................................... done, booting the kernel. Linux version 2.6.15 (root@image.synology.com) (gcc version 3.4.3 (CSL 2005Q1B) (Marvell 2006Q3)) #590 Wed Mar 12 19:35:16 CST 2008 CPU: ARM926EJ-Sid(wb) [41069260] revision 0 (ARMv5TEJ) Machine: MV-88fxx81 Using UBoot passing parameters structure Sys Clk = 166666667, Tclk = 166666667 Synology Hareware Version: DS207+v10 Internal HD num: 2 Memory policy: ECC disabled, Data cache writeback CPU0: D VIVT write-back cache CPU0: I cache: 32768 bytes, associativity 1, 32 byte lines, 1024 sets CPU0: D cache: 32768 bytes, associativity 4, 32 byte lines, 256 sets Built 1 zonelists Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS207+v10 ihd_num=2 PID hash table entries: 1024 (order: 10, 16384 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 128MB = 128MB total Memory: 122552KB available (2302K code, 582K data, 108K init) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok checking if image is initramfs...it isn't (no cpio magic); looks like an initrd Freeing initrd memory: 4096K NET: Registered protocol family 16 CPU Interface ------------- SDRAM_CS0 ....base 00000000, size 128MB SDRAM_CS1 ....disable SDRAM_CS2 ....disable SDRAM_CS3 ....disable PEX0_MEM ....base e0000000, size 128MB PEX0_IO ....base f2000000, size 1MB PCI0_MEM ....base e8000000, size 128MB PCI0_IO ....base f2100000, size 1MB INTER_REGS ....base f1000000, size 1MB DEVICE_CS0 ....base fa000000, size 2MB DEVICE_CS1 ....base f8000000, size 32MB DEVICE_CS2 ....base fa800000, size 1MB DEV_BOOCS ....base ffc00000, size 4MB Marvell USB EHCI Host controller #0: c0bf3e00 PCI: bus0: Fast back to back transfers disabled PCI: bus1: Fast back to back transfers enabled SCSI subsystem initialized use IDMA acceleration in copy to/from user buffers. used channels 2 and 3 Done. VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered Serial: 8250/16550 driver $Revision: 1.3 $ 2 ports, IRQ sharing disabled serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize loop: loaded (max 8 devices) Marvell Gigabit Ethernet Driver 'egiga': o Ethernet descriptors in DRAM o DRAM SW cache-coherency o Checksum offload enabled o Loading network interface 'egiga0' as eth0 o Radom MAC address 00:e6:67:d7:4f:4b PCI: enabling device 0000:00:01.0 (0140 -> 0143) Delay 10 seconds to wait for disk 0 ready. Delay 10 seconds to wait for disk 1 ready. scsi0 : Marvell SCSI to SATA adapter scsi1 : Marvell SCSI to SATA adapter scsi2 : Marvell SCSI to SATA adapter scsi3 : Marvell SCSI to SATA adapter Vendor: Seagate Model: ST3250620AS Rev: 3.AA Type: Direct-Access ANSI SCSI revision: 03 drivers/scsi/sd.c (1707) Internal disk with bus id: 0 SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB) SCSI device sda: drive cache: write back sda: sda1 sda2 sda3 sd 0:0:0:0: Attached scsi disk sda physmap flash device: 400000 at ffc00000 DS406-0: Found 1 x16 devices at 0x0 in 8-bit bank Amd/Fujitsu Extended Query Table at 0x0040 DS406-0: Swapping erase regions for broken CFI table. number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. Searching for RedBoot partition table in DS406-0 at offset 0x3b0000 6 RedBoot partitions found on MTD device DS406-0 DS406 flash bank 0: Using RedBoot partition definition Creating 6 MTD partitions on "DS406-0": 0x003c0000-0x00400000 : "RedBoot" 0x00000000-0x00200000 : "zImage" 0x00200000-0x00380000 : "rd.gz" 0x00380000-0x00390000 : "vendor" eth0: mac address changed Mac1: 00:11:32:XX:XX:XX (hidden in the wiki only) vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0. Vender partition MacNum:1 retlen:64 Serial Number: 83EXXXXXXX (hidden in the wiki only) 0x00390000-0x003b0000 : "RedBoot Config" 0x003b0000-0x003c0000 : "FIS directory" md: raid0 personality registered for level 0 md: raid1 personality registered for level 1 raid6: int32x1 29 MB/s raid6: int32x2 45 MB/s raid6: int32x4 51 MB/s raid6: int32x8 48 MB/s raid6: using algorithm int32x4 (51 MB/s) md: raid6 personality registered for level 6 md: raid5 personality registered for level 5 md: raid4 personality registered for level 4 raid5: measuring checksumming speed arm4regs : 429.600 MB/sec 8regs : 369.200 MB/sec 32regs : 513.200 MB/sec raid5: using function: 32regs (513.200 MB/sec) NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 VFP support v0.3: implementor 41 architecture 1 part 10 variant 9 rev 0 md: Autodetecting RAID arrays. md: autorun ... md: considering sda1 ... md: adding sda1 ... md: sda2 has different UUID to sda1 md: sda3 has different UUID to sda1 md: created md0 md: bind<sda1> md: running: <sda1> raid1: raid set md0 active with 1 out of 2 mirrors md: considering sda2 ... md: adding sda2 ... md: sda3 has different UUID to sda2 md: created md1 md: bind<sda2> md: running: <sda2> raid1: raid set md1 active with 1 out of 2 mirrors md: considering sda3 ... md: adding sda3 ... md: created md2 md: bind<sda3> md: running: <sda3> raid1: raid set md2 active with 1 out of 1 mirrors md: ... autorun DONE. RAMDISK: Compressed image found at block 0 VFS: Mounted root (ext2 filesystem).
This category currently contains no pages or media.
